Vacuum cleaners have always been used for cleaning purposes at homes. Most workshops that make use of heavy machinery or do some woodwork also have them handy. But, the dust produced by a workshop includes wood shavings, dust, etc. that could get trapped in the hose of the vacuum cleaner and damage the machine. If the dust itself is not taken care of, it could fly off into the machines and create a serious risk of fire. You could also inhale it, thus damaging your lungs.
Therefore, dust Extractor must be used as it has a bigger hose and is able to collect all kinds of dust that may damage the vacuum cleaner.
What is the difference between a vacuum cleaner and dust extractor?
The simplest difference between a vacuum cleaner and a dust extractor is the ideology behind both tools. The vacuum cleaner is made to clean the area and the house by giving a tiny volume of air at high velocity.
On the other hand, a dust extractor is used to extract large-sized dust from the ground and therefore, makes use of the high volume of air at low velocity. A dust Extractor is able to get rid of the kind of dirt that can be found in areas involving wood and metal machinery. Thus, a dust Extractor is always a better option than a vacuum cleaner.
Top tips for Dust Extractor
Here are top 5 tips that you must be aware of when planning to buy or use a dust extractor.
- Get the right dust extractor
The choice of your dust extractor is the first step to maintaining the cleanliness and safety of your workshop. Just like every woodworking machinery is different from another, the waste we produce is also different.
Therefore, it must be handled using the equipment that is suitable for them. So one must be clear of the kind of wood waste that is produced and buy a dust Extractor accordingly. The most commonly used extractors are chip, fine dust, and vacuum.
- Ground your system
The dry Timber particles that every dust collector comes in touch with has a potential static charge. Static charge is usually developed when you run a plastic comb or a balloon through your hair. But an actual piece of machinery multiplies the charge, which can lead to a spark or worse, an explosion when combined with fine dust particles and air. Though these explosions are a rarity, it is always a good idea to be safe. Therefore, make sure to fit the Extractor with the grounding kit to minimize the effects of static charge.
- Replace the filters regularly
All kinds of dust, dry Timber, and other savings collected in 
- Get inline dust separators
The sheer volume of your waste material can be very large when it comes to extraction. Therefore, you must make sure that you have a separate container where the dust is disposed from the Hopper. This container needs to be emptied regularly so that it doesn’t pile on in the Hopper. Remember, the longer the dust stays in The Hopper, the higher are the chances of a fire or an explosion.
- Get a safety monitoring filter
The dust extractors come equipped with a high-efficiency filter that collects the fine dust. The safety filters are an extra layer of protection that does not allow the dust to enter into the workspace of the machinery in case there is a leak in the primary filter. This filter becomes extremely important if the dust collector recycles the air downstream. It helps in recirculating the air back into the plant, thus saving a lot of energy. This also reduces the amount of contaminated air that is exhausted out of the plant, reducing all the paperwork that you may have to go through for that. More links
Meta – Looking to use a dust extractor but are unsure how to go about it? These few tips are sure to help!