I’m guessing you have a water heater if you’re reading this. And you might be wondering, is it necessary for me to maintain the machine regularly?
Photo by Anastasia Taioglou on Unsplash
Do you have any doubt about whether or not you’re providing your water heater with the proper maintenance it requires? In this topic, we will understand why you should be doing maintenance on your water heater. When it comes to keeping your water heater in good working order, here are some primary considerations to bear in mind.
What to know about your water heater?
Your water heater can work more smoothly, effectively, and last longer if you maintain it regularly. Water heater maintenance will help you prolong the life of your unit, increase its energy efficiency, and save money. Knowing that your water heater holds 50 gallons of piping water, it’s essential to keep it in good working order. You need to consider water heater maintenance because minerals and other sediment build up in water heaters, making them work harder to do their jobs. It can also lead to the rusting of the tank. However, there are a few steps and tasks you can take to help avoid these issues:
Inspect your valve once a month
A simple inspection of your water heater’s pipes and valves will reveal rust and leaks before it becomes worse. It’s much easier to conduct a prompt assessment once a month than to contend with a destructive flood triggered by a leak that could have been prevented.
Set the temperature to 120 degrees Fahrenheit
Always keep in mind that temperatures higher than 12 degrees can form deposits that can harm your water heater. Isn’t it nice to be able to relax without fear of anything going wrong at home? Setting your heater to vacation mode could keep the pilot light without heating the water when you’re away on a trip.
Cleaning and Flushing of the water heater tank
Rust from your water supply will accumulate in the bottom of your water heater, forming a harmful sludge. To avoid corrosion, minerals to develop, cleaning, and Flushing are the simple things you can do. Before you begin, turning off the electricity and gas from the heater is essential. Connect the drain valve to a hose. Drain the tank safely by opening the hot handle of any faucet. Close the drain valve and cut the hose until the tank is empty. After that, you should turn on the cold water faucet. Then, one by one, open the hot water faucets in your house and wait for the water to run before restarting power to the heater.
Anode replacement
What is an anode?
A long metal rod that absorbs corrosive minerals and removes them from a system. If it was already damaged and needed to be replaced, you can double-check. If it’s too corroded, it won’t work correctly and won’t be able to do its job. There are two types of anode rod, aluminum, and magnesium but it’s up to you what you will choose. Buying a new anode rod is much cheaper than purchasing a new water heater.
Valves for temperature and pressure relief should be tested.
Corrosion can make your valve stuck. To check your valve, Close the cold water supply valve and shut off the electricity or gas to the heater. Expect some water to flow if you raise the valve’s trip lever. If there is no water coming out of the valve, it needs to be replaced.
You may be wondering if you can perform all of the tasks needed to maintain your water heater. You can always employ specialists and experts to assist you if you are uncertain about doing it yourself. Our team of Austin water heater repair experts will mount and repair your water heater efficiently. We’re here to solve the problem of keeping your water heater in good working order. Our expert would be ecstatic to work with you.