When Should you Get a Pool Deck Overlay for your Pools?

brown wooden lounge chairs beside swimming pool during daytime

Photo by yang wewe on Unsplash

Nowadays, different materials consist of swimming pools. It is not only the conventional tiles or concrete decking that make up their design. Now you can find a pool deck overlays Los Angeles mingling with composite wood decks of Florida. Some are out of DIY pebbled flooring combining with pavers. 

Photo by TravelPriceWatch on Unsplash

These are themes that add appeal to the deck. But underneath, another reason for using supporting materials is to combine efficient materials with durable materials. Conventional decks have less lifespan than the others. Some have low resistance, too. 

An overlay of concrete or other coating materials refinishes the pool deck in case of damage. As constant water impacts the surface, its quality will reduce.

What are the signs that tell you to resurface the decking around the pool? Here are four common signs to know.

1- Slicky Surface

You can have water-resistant decking, but natural elements affect the protective coatings as time goes and weather changes. A concrete can turn slippery because of reacting to the pool water and rain.

Did you ever experience when after several days of rain and you decided to stroll by the poolside, you feel that the deck’s surface becomes slippery? You notice that there’s a sort of a thin coating that makes it slimy and slippery to walk on. 

Rainwater is the exterior concrete’s ultimate villain. An acidic compound in the rainwater can wash the topical sealers applied to a concrete deck. That is why one solution is stamping the concrete. The texture created from the pattern of the stamp gives extra traction to the surface. You can pour an overlay if you have an existing pool decking with concrete to enhance skid-resistance.

Photo by Jonathan Borba on Unsplash

2- Cracked Surface

Crack is familiar to stamped concrete. The primary solution here is pouring an overlay. The cracks developed due to week substrate and faulty installation. 

Common among pool areas is that the ground underneath may have been exposed to water leaking. So, the result is that the slabs start cracking. The constant water exposure contributes to the quick wearing of the material.

Pouring a concrete pool deck overlay fixes the cracks. The new set of concrete also restores the qualities of the slab. During installation, the gaps must be filled first. According to experts of pool deck overlays in Los Angeles CA, the added layer of thick concrete on top adds strength to the whole concrete system. 

3-Discoloration

Overlay and stamping are common ways y to refinish the concrete. Discoloration on the pool deck can be fixed through recoloring. But to have an effective recoloring, the slabs must be even and flawless. 

If the slabs are growing weak and reducing waterproofing, it’s better to refinish and refresh the top layer with an efficient concrete overlay. To achieve a better look and color-penetration, you apply a knockdown texture Minneapolis concrete experts recommend. 

Photo by Alexander Kaunas on Unsplash

4- Scaling & Peeling

A glossy surface of the pool deck is credited to its top sealer. In some cases, due to improper application, the sealer peels off. As heat and water take turns in brushing the surface, the sealer gets disturbed. So, peeling happens. 

Like peeling, scaling patterns signal you to get a much more efficient covering for the pool’s flooring. Scaling patterns appeared on the bare concrete surface when the cement mix did not cure appropriately during application. It happens due to not enough heat and natural sunlight to completely dry the mixture. Applying a sealer before the concrete cures will also result in scaling. 

A faulty process is challenging to reverse. One sure fix is to pour an overlay to a scaling surface to increase strength. 

Exit mobile version