Author: ION

This winter was a particularly harsh one, not just for people and animals, but for our homes as well. The amount of snow and freezing that occurred in the majority of the country, as well as powerful winds,  can cause a lot of damage to your home.

Even if you cannot see any damage while the winter reigns, once the snow melts, it can leave a damaged house in its wake. What’s more, the water which forms from the melting snow can use the damage to find its way into your house and cause even more damage. Here’s what to check as soon as possible. Repairing the damage to your house while it is miniscule is preferable to waiting until it escalates and costs a lot more. Just be sure to only contact registered contractors to work on your house.

The Roof

Snow weighs a lot. The more snow you have, the more weight your roof needs to support. If the roof wasn’t designed to carry so much snow on it, it can buckle, and damage can occur both to the rafters inside, as well as on the surface of the roof.

Individual shingles on your roof are also susceptible to damage. They can also break under the weight of the snow, but they can also be affected by the extreme cold. However, the most critical part of the roof are the flashings. Flashings are the (typically metal) guards which surround the chimney and other connection points of your roof.

The main reason why flashings are so endangered is that they are made of metal. Metal expands and contracts more than wood and shale when exposed to cold and warm temperatures. It can be bent out of shape by melting and re-freezing of snow. That can leave your attic exposed to water and water damage.

Mold

Where there is water and dark, mold infestation is not far behind. Dark and inaccessible parts of your house, like the attic, the basement, and even inside your dry walls can be an ideal environment for mold to thrive.

What’s good for the mold is, however, in no way good for you. Regular mold can damage your house and cause various allergic reactions, but if you have black mold, the situation becomes more severe. Black mold is also known as toxic mold because it can excrete a substance known as mycotoxin, which is dangerous to both people and animals.

If you have found water inside your house where it doesn’t belong, you can assume that mold will form, and you shouldn’t wait to solve that problem. Consult professional mold removers quickly.

Slab Leak

Another part of your home which can be affected by the winter is your plumbing. Water pipes, as well as sewer lines, tend to be full of water. The problem with water is that it expands when it freezes, unlike any other matter. If a pipe is already full of water, once it freezes, it can cause a leak in the pipe, known as a slab leak.

The problem is likely to manifest only when the snow and ice have melted. The first thing you may notice is a high water bill, but you may also hear water rushing even though no taps are turned on. Just like with mold, you are going to need professional help.

Consult professional leak repair company, like https://www.kicrestoration.com/water-damage/slab-leak-repair-san-diego/ to ensure that the repair is done as quickly and professionally as possible. Professionals have a variety of equipment to help them locate, assess, and repair slab leaks with minimal invasiveness.

Winters can be tough on your house, especially if it is old. Make sure that your house is safe and in top condition come spring.

The AC units are so ubiquitous in our homes and offices that we take them for granted and don’t really think about them until something goes wrong and we need AC repair. If somebody asked you how AC worked, you would probably laugh at the simplicity of the question.

However, if you take a second to really think about it, not a lot of people actually know how it works. All we know is that it cools down the indoor air to a pleasant temperature and that we cannot live without it. If you want to learn a bit more about this important device, read on; hint – it’s pretty much the same as your fridge. The example taken is the split air conditioning system since the majority of American homes have one of these.

Refrigerant

Your AC relies on a chemical called refrigerant to cool your house down. This chemical is very good at transferring heat, which makes it an ideal candidate to take the heat out of your indoor air and transfer it outside, as well as cool down the outside air and distribute it inside.

This chemical is kept inside a closed system, which means that it doesn’t get into your air. However, this chemical can lose its effectiveness, or escape the system if there is a leak, which is just one of the reasons why regular maintenance of AC units is important.

Parts of the Air Conditioning Unit

In essence, there are three main pieces to every air conditioning system – the compressor, the evaporator, and the condenser. If you have a split air conditioning system, the compressor and the condenser are located in the outside unit, whereas the evaporator is indoors. The outdoor unit tends to be big, because it needs to have a housing which can withstand the elements, as well as be safe and effective enough to function as a cooling device.

You can have some additional prats, like the ducts going through your house, or an inverter in more advanced air conditioning systems, but these three parts are necessary for an AC to work.

The Air Cycle

The refrigerant cycles to the compressor in the form of a gas, which has low density and low pressure. The compressor compresses the gas, turning it liquid. The liquid is then pushed through the condenser which has fins that dissipate the heat, like a car’s radiator would.

By the time the refrigerant leaves the condenser, it is considerably cooler and ready to cool your house down. The high pressure keeps the refrigerant liquid, regardless of the temperature. However, when the refrigerant reaches the evaporator, it is fed through a small opening, meaning only small amounts of it can reach the indoor unit at a time.

Once the refrigerant reaches the evaporator, the pressure decreases significantly, and the liquid turns to gas. The evaporator looks similar to the condenser, meaning it has the metal fins to facilitate the heat transfer. The refrigerant goes through the evaporator in the similar way it went through the condenser, except now it is collecting heat from the surrounding air, and not dissipating it – the process is reversed.

That leaves the air inside cool, and the refrigerant is sent back to the compressor in the form of a gas to be turned into liquid once again. The fans in the inside unit disperse the cooled air all though your house, or if you have ducts, the air is sucked into the ducts, passed through the evaporator, and then blown out through the ducts once more, this time significantly cooler.

Completing the Cycle

That is a simple example of a cooling cycle. However, the cooling of your house isn’t done in a single cycle. In most cases, several cycles are required to sufficiently cool down your home or your office. Once the thermostat reaches a certain temperature, the AC unit stops working until the temperature rises above the desired level and the cycle begins again.

Seeing how important AC units are in the USA, it is always good to know the basic functioning principle. If anything goes wrong with your AC, you may be able to deduce where the problem occurred and you will certainly be able to understand the explanation that your AC technician gives you.

Everyone loves long and warm baths. It’s relaxing, especially when you’re faced with the cold and harsh weather. Most people prefer warmer water. And to achieve this, you need to install the heater properly. Ever since this was created, the heater became a mainstay in the bathroom and in most areas that require water. It offers comfortable water for the entire household and for specific establishments. When it malfunctions, it becomes too hot or it doesn’t work at all, resulting in freezing water. On such circumstances, relying on professional services like Denver Water Heater Repair can be a better choice.

It’s good to prevent the issues from getting bigger. If you notice these signs, it’s time to call your resident water heater repair expert.

No hot water. This is the most obvious sign. There are instances when the supply is completely cut-off. But it’s quite easy to determine the difference between the issue with the whole system and an issue with the heater. If there is no supply, everything won’t function.

If the hot water supply is the only problem, then there’s a higher chance that the heater is acting up and it needs to be fixed.

Rusty-looking water. This means there’s an internal problem. There are others who also noticed an odd taste and smell from their water. If this happens, the heater or the pipes are rusted. And the rust has corroded. This can be dangerous. It needs to be fixed properly and immediately. Replacement is the only option.

Leaks. Not only is this going to be a problem for the heater. It will also become the reason why you’re paying high for your water bills when you’re not even using it that much. Some homeowners are aware of the basic process so they can effectively inspect the entire system. This way, you can pinpoint where the issue is coming from.

Noise. Because of the temperature, most water heaters will collect sediments at the bottom of the tank. And when the water warms, there will be a popping sound. Or it can also be something cracking. If you hear this, there’s a high chance that the water heater is working too hard. And it needs to be resolved. This can create a big damage to the tank.

Old age of the water system. If you consider the age, there’s bound to be difficulties and issues sooner or later. And if that happens, this is not the only problem you have to be wary about. If this is not fixed immediately, it becomes bigger. And the entire system becomes more affected and more problematic. Constant inspections are essential especially when the system or your heater is already a decade old.

It’s more convenient and can help you achieve better results compared to taking care of the whole thing alone. Others have decided to evaluate the different services that are currently available. It’s important to note the best services. And this can be done through considering the various factors and creating certain guidelines to use when you’re confused or faced with various companies.